API standard 650 fixed roof tanks bolting

The API standard 650 Fixed roof tanks stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.
Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.

The liquid level of API 650 oil storage tank is covered by floating roof. The storage liquid of API 650 oil storage API standard 650 fixed roof tanks tank is isolated from the air, reducing air pollution, fire and explosion hazards, and easy to ensure the quality of liquid storage. It is especially suitable for the API standard 650 fixed roof tanks storage of high-grade gasoline, jet fuel and toxic and easily polluted liquid chemicals.

As we all know, steel pipes occupy more space in the process of transportation. If there is no good way of packing, the transportation cost for steel pipes will be a big expense. In view of this characteristic, our company is ingenious and adopts the nest package method to solve this problem perfectly. The premise of the nest package is that the diameters of the steel pipes are different, and the small diameter pipe is inserted in the large diameter pipe. This not only saves the volume, but also saves the transportation cost. It also reduces the loading and unloading workload by half, saves precious time, and enables customers to receive goods earlier.

Large-scale vertical API standard 650 fixed roof tanks mostly use internal tank bottom heating coils to heat the medium stored in the storage tanks. The heating coils are mostly smooth tube structures arranged in an annular circle along the bottom of the API standard 650 fixed roof tanks. Commonly used heating methods include hot oil circulation heating method and hot water steam circulation heating method. The hot oil circulation heating method is to continuously extract part of the liquid medium from the storage tank, and then return it to the container to mix with the medium in the tank after heating, and the heat is quickly transferred through mechanical stirring.