API standard 650 carbon steel storage tanks special considerations

The company has a group of mature steel plate production and processing line construction and production management experience. In addition, the company has professional and technical personnel. BBN steel is a modern enterprise integrating scientific research and development, production processing, sales and service. The company now has finance department, production department, sales team, technical department, quality control department, logistics department and after-sales service team. At the same time, it also adheres to international standards and adheres to the international line.

The cleanliness of the API standard 650 carbon steel storage tanks has a great influence on the safety of the tank and the quality of the oil stored. Keeping the API standard 650 carbon steel storage tanks clean can slow down the corrosion of the tank wall and reduce the pollution to the oil. If the inside of the API standard 650 carbon steel storage tanks is not cleaned all the year round, a lot of rust and metal impurities will be produced in the tank. These impurities will cause the oil to slowly oxidize and deteriorate. The impurities mixed into the oil will also block the filter and oil circuit, causing oil supply failure.

Any joints between the adjacent sections of API 620 oil storage tank stiffening rings, as shown in Figure Q-1, shall be made so that the required moment of inertia of the combined ring-shell section is provided. Weld joints between adjacent sections shall be made with full-thickness and full-penetration butt-welds. Stiffening-ring butt-welds may employ metal backing strips. Backing strips and the associated welding shall be made in a manner that provides a smooth contour in the rat hole and all other weld joint ends. All weld passes shall be started at the rat hole and other weld joint ends and shall be completed by moving away from these ends. Passes shall be overlapped away from edges to provide a smooth continuous weld.