API standard 650 carbon and low-alloy steel tanks anchorage

After more than 20 years of ups and downs in the steel industry, BBN company's customers have covered South America, North America, Europe, Africa, Southeast Asia and the Middle East and other countries and regions We treat every customer who inquires with us sincerely, whether you cooperate with us or not, we will provide you with the best quality steel solutions Our company team also support the online customer service,API standard 650 carbon and low-alloy steel tanks. Visual InspectionUpon completion of all the foregoing tests, the pressure in the tank shall be released and a thorough visual inspection shall be made of both the inside and outside of the tank, giving particular attention to all internal ties, braces, trusses, and their attachments to the walls of the tank. Anchors shall be checked for snug tightness and adjusted if required. Anchor threads shall be fouled by peening or tack welding to prevent loosening. In lieu of thread fouling, double nuts may be used.Rate of Water Filling and Water TemperatureThe rate at which water is introduced into a tank for a hydrostatic test shall not exceed 3 ft of depth per hour. The foundation, venting equipment, or other conditions may limit the water filling to a lower rate. Pressure shall not be applied above the surface of the water before the tank and its contents are at about the same temperature.The tank wall design of API 650 oil storage tank. Since there is no ventilation pipe directly connected with the outside on the top of the API standard 650 carbon and low-alloy steel tanks tank, the ventilation between the inside and outside of API 650 oil storage tank is realized by the respiration valve. The constant pressure of the respiration valve is 0.3kPa, so the pressure on the top of the tank is 0.3kPa.Management concept: integrity is the cornerstone, talent is the foundation, and service is the key.Business philosophy: to keep faith, to win by quality, customer first, win-win development.Based on integrity, win customers with good reputation, win competition with excellent product quality, improve service with customer orientation, and pursue the goal of win-win development in cooperation with customers.Sincerely welcome customers to visit and negotiate business.After the API standard 650 carbon and low-alloy steel tanks is manufactured, air tightness test and water filling test are carried out according to the design requirements, and the pipeline must be subjected to pressure test to fully meet the acceptance technical specifications. Improve the quality assurance system, adhere to the principle of who constructed is responsible for the quality of the project, conduct regular quality inspections, and immediately rectify any problems. Fill in the API standard 650 carbon and low-alloy steel tanks installation technical records in time to ensure the synchronization, integrity and reliability of the technical data.