API standard 650 aluminum storage tanks isolation valves

The company focuses on teamwork and builds a team with a dream. For society: we focus on quality first, integrity-based, service-oriented create value for customers and wealth for the society. For employees, the company promote healthy living, happy work, unity, innovation. For working, we seek the efficient operation, the pursuit of excellence. Welcome to come, visit our office building and join us.Shell Stiffening Rings for Tanks That Contain Liquid
Internal or external shell stiffening rings may be required to maintain roundness when the tank is subjected to wind, vacuum, or other specified loads. When API standard 650 aluminum storage tanks stiffening rings are required, the stiffener-to-shell weld details shall be in accordance with Figure Q-1 and Q.3.5.2 through Q.3.5.5.
Three-plate laps or butt-weld junctions in tank bottoms shall be not closer than 12 in. from each other or from the butt-welds of the annular plates.
Bottom plates, other than annular bottom plates for a 9% or 5% nickel steel or stainless steel tank that contains liquid, may have a minimum thickness of 3/16 in. exclusive of any specified corrosion allowance.The thickness of the overburden on the top of the API 650 oil tank should not be less than 0.5m. The surrounding backfill with clean sand or fine soil should be no less than 0.3m thick; the API 650 oil tank API standard 650 aluminum storage tanks operation platform ladder selection unit is considered in a unified manner. The buried operation well is designed for buried horizontal oil tanks, and the two are compatible.Based on the principle of “sincerity and win-win cooperation”, our company keeps forging ahead. In the fierce market competition, we have won the trust and rapid development of our customers with good cooperation and sincere service spirit. With pioneering spirit, the pursuit of excellence, continuous learning, and never satisfied content, we will create a win-win situation with our customers to create a better future. The company has sufficient inventory and complete varieties and specifications.Due to irregular operation of API standard 650 aluminum storage tanks welding, there are many weld deformations during the construction process. Before specific operations, most construction units have formulated relatively complete construction plans and set up special welding process instructions, but the operators have not fully performed welding in accordance with various process guidance requirements and construction specifications, resulting in some quality problems of oil storage tanks. How can we reduce or even avoid this kind of situation?