API standard 650 aluminum storage tanks corroded thickness
In cylindrical tank walls, the longitudinal weld joints in adjacent shell courses, including compression ring welds, shall be offset from each other a minimum distance of 12 in. The butt-weld around the periphery of a thickened insert plate, or the fillet weld around the periphery of a reinforcing plate, shall be at least the greater of 10 times the shell thickness or 12 in. from any butt-welded seam or the bottom-to-shell or roof-to-shell joint. As an alternative, the insert plate (or the API standard 650 aluminum storage tanks reinforcing plate in an assembly that does not require stress relief) may extend to and intersect a flat-bottom-to-shell corner joint at approximately 90 degrees.
API 650 petroleum storage tank pipeline stress and product pressure, tank pressure, uniform or non-uniform temperature difference between the tank wall and the tank bottom, which cause the radial displacement and longitudinal rotation of the API standard 650 aluminum storage tanks tank wall at the opening to affect the oil tank wall The impact is obvious. Therefore, the design must ensure that the load applied by the external pipeline on the opening of the tank wall is within the safety limit. If the stress of the API standard 650 aluminum storage tanks connecting piping is not handled properly, the wall of the API 650 petroleum storage tank may deform or even rupture, causing a major accident.
In year 2015, we ship 750 tons H beam to Pakistan for our old customer for building use. Because of urgent demand, the H beams are partial shipment by bulk vessel. Due to strong support of our customer, we also export many C channel steel, API standard 650 aluminum storage tanks I beam and other profile steel to local market.
}The manufacturing requirements of bottom plate of vertical metal tank, API standard 650 aluminum storage tanks are as follows: 1. In order to compensate welding shrinkage, the layout diameter of tank bottom is 5-2mm than the design diameter; 2. The butt joint of edge plate of tank bottom shall be machined automatically or semi-automatically; 3. The distance between any two adjacent welding joints on the tank bottom plate and the distance between the butt joint of edge plate and the longitudinal weld of bottom ring wall plate shall not be greater than 200 mm.
We are willing to cooperate sincerely with you with high-quality API standard 650 aluminum storage tanks products and sincere service to expand the market and create brilliant! We will work hard to create a first-class steel company and provide you with faster and more considerate after-sales services! Moreover, our shipbuilding steel plates have been certified by the nine countries' classification societies including DNV, ABC, GL, LR, BV, CCS, RINA, NK, and KR. The quality assurance system has passed ISO9001-2000 standard certification.
