API 650 unanchored flat-bottom tank hydrostatic test

The quality inspection department is responsible for the inspection management of raw materials and finished products, and the quality inspection and acceptance of products and raw materials. Strictly abide by the company's management system, conscientiously exercise the management power given by the company, and put an end to all ultra vires; be responsible for the inspection of all kinds of raw materials entering the company, and put forward quality problems and handling opinions.

Proper use of API 650 unanchored flat-bottom tank and precautions:
1. The API 650 unanchored flat-bottom tank must be used within the safe height range;
2. Check before use to ensure that the safety valve and breathing valve are flexible and easy to use;
3. The explosion-proof and fire-proof safety measures for oil tanks are implemented effectively;
4. The oil level in the API 650 unanchored flat-bottom tank should be accurately measured when receiving and delivering oil, so as to prevent overflow or empty;
5. In the process of receiving and sending oil, the flow rate of oil should be controlled, and it should not be too fast to avoid electrostatic accidents.

Suggested Practice Regarding Installation of Low-pressure storage tanks
Access: All openings and accessories for tanks API 650 unanchored flat-bottom tank constructed according to this standard shall be installed so that any periodic inspections required can be readily made.
Corrosion: When a tank bottom rests directly on the ground, a survey shall be made to establish the need for cathodic protection.
Drainage: All tanks in which water might accumulate under the hydrocarbon contents shall be provided with adequate drains that are suitably protected from freezing.