API 650 storage tanks sheet and plate

In order to further transform the operation mechanism, establish the operation concept of "market-oriented, customer-centric", strive to improve our core competitiveness and promote the rapid development of business; further strengthen customer marketing management, subdivide customer groups, establish a top-down, crisscross, hierarchical marketing mechanism of "everyone is a marketer", and provide for the needs of different levels of customers Corresponding services.Shell Stiffening Rings for Tanks That Contain Liquid
Internal or external shell stiffening rings may be required to maintain roundness when the tank is subjected to wind, vacuum, or other specified loads. When API 650 storage tanks stiffening rings are required, the stiffener-to-shell weld details shall be in accordance with Figure Q-1 and Q.3.5.2 through Q.3.5.5.
Three-plate laps or butt-weld junctions in tank bottoms shall be not closer than 12 in. from each other or from the butt-welds of the annular plates.
Bottom plates, other than annular bottom plates for a 9% or 5% nickel steel or stainless steel tank that contains liquid, may have a minimum thickness of 3/16 in. exclusive of any specified corrosion allowance.The Standard has gained international recognition and is the standard of choice of most builders of large liquid above ground API 650 storage tanks storage tanks. One reason for this is that the API 650 Standard was created and is revised by API committees comprised of the world s best tank structural engineers who also rely on the experience of tank owners and tank construction companies.Training is one of the important factors in the construction of corporate culture. Online training system can be used to enable all employees to take advantage of fragmented time and carry out targeted training anytime and anywhere without the limitation of time and region. Through training to improve work skills, at the same time, through training, let all improve their quality education level, let employees work around a goal, create a career, and produce results.Oil tank is often used to store crude oil, diesel oil, gasoline and other oil. The main structure of API 650 storage tanks is composed of tank top, tank wall, tank bottom and accessories. The API 650 storage tanks should be inspected after the completion of construction, and the detection methods of different structure positions are different. Tank wall inspection: for the newly built oil tank, water filling test shall be conducted to check whether the tank wall is tight, and the appearance inspection shall be conducted for the tank wall plate and weld. Tank wall thickness detection: the oil tank wall thickness is mainly detected by ultrasonic wave, with high efficiency.