API 650 self anchored flatbottom tanks design thickness

Material for the outer tank API 650 self anchored flatbottom tanks and for the roof that contains the vaporized liquefied gas but is primarily subjected to atmospheric temperatures may conform to one of the following:
a)Table 4-1 for design metal temperatures down to –35°F (lowest 1-day mean ambient temperature of–35°F) without impact test unless they are required by Table 4-1 or by the Purchaser.
b)Table R-3 for design metal temperatures down to –60°F without impact tests unless they are required by Table R-4 or by the Purchaser.

API 650 internal floating roof tanks are generally called internal floating roof tanks, floating roof tanks, internal floating disk storage tanks, internal floating disk tanks, etc., specifically referring to API 650 storage tanks and oil tanks with aluminum, stainless steel, etc. The API 650 self anchored flatbottom tanks inner floating roof of series material is an environmentally friendly and economical storage tank that prevents liquid from volatilizing.

Prefabrication requirements for API 650 self anchored flatbottom tanks, large vertical storage tanks:
1. The machined surface of the edge of the steel plate should be smooth, and there should be no defects such as slag inclusion, delamination, cracks, etc., and the surface hardened layer produced by the flame cutting groove should be removed.
2. Dimension deviation after steel plate processing: the deviation of plate width is less than 1.5 mm, the deviation of plate length is less than 2 mm, and the difference between diagonals is less than 3 mm.