API 650 self anchored flatbottom tanks bleeder vents

Crack treatment of API 650 self anchored flatbottom tanks weld area: find out the crack tip with ray or ultrasonic flaw detection, drill cut-off holes at both ends of the crack with the cut-off method, the hole depth is slightly greater than the crack depth, or groove (crack stop groove) is made by angle grinder at both ends of the crack, shovel and grind the whole crack, and grind it into a suitable groove; use radiographic inspection and dye detection to verify that the crack has been completely excavated, and finally repair welding.

Structural shapes of 9% and 5% nickel steel may be furnished to the chemical and physical requirements of ASTM A353, A553, or A645. Physical tests shall be in accordance with the requirements of ASTM A6.
API 650 self anchored flatbottom tanks used Piping, Tubing, and Forgings
Material used for piping, tubing, and forgings shall be compatible in welding strength, and thermal expansion coefficient with the tank shell material. In addition to the specific requirements of this appendix, all piping within the limitations of 1.3.2 shall fulfill the minimum requirements of ASME B31.3.

We also specialize in internal and external floating roofs, cathodic protection, primary and secondary containment, and storage tank foundations. Our staff are skilled in producing API 650 petroleum storage tanks. If you need to replace or repair API 650 self anchored flatbottom tanks API 650 petroleum storage tanks, please contact us in time. Every API 650 petroleum storage tank we make emphasizes quality and safety.