API 650 open top welded storage tanks earth foundations without a ringwall

If additional requirements are met, higher internal pressures are allowed. API 650 only covers tanks that support the whole bottom evenly and API 650 open top welded storage tanks tanks in non-refrigerated service that have a maximum design temperature of 200 degrees F. It requires that you have a minimum material thickness of 3/16 inch.

Shell Stiffening Rings for Tanks That Contain Liquid
Internal or external shell stiffening rings may be required to maintain roundness when the tank is subjected to wind, vacuum, or other specified loads. When API 650 open top welded storage tanks stiffening rings are required, the stiffener-to-shell weld details shall be in accordance with Figure Q-1 and Q.3.5.2 through Q.3.5.5.
Three-plate laps or butt-weld junctions in tank bottoms shall be not closer than 12 in. from each other or from the butt-welds of the annular plates.
Bottom plates, other than annular bottom plates for a 9% or 5% nickel steel or stainless steel tank that contains liquid, may have a minimum thickness of 3/16 in. exclusive of any specified corrosion allowance.

The head of API 650 open top welded storage tanks etc. vertical oil tank is the end cover on the top of vertical oil tank. It is used to separate the oil stored in the tank and the medium outside the tank, and also used to bear the pressure on the top of the vertical oil tank. The quality of the head is closely related to the long-term safety of the API 650 open top welded storage tanks. The head surface can be divided into convex shape, cone shape and flat shape according to its shape. The oil tank head can not be disassembled after welding.

We had a wonderful trip in Phuket Island, Thailand. At the end of 2019, in order to thank employees for their hard work for a year and enrich their lives, our company organized a pleasant trip to Phuket Island, Thailand. The tour lasted 6 days and 5 nights, and returned by plane on the evening of December 27. We took off in Zhengzhou at about 5 o'clock in the afternoon on the 22th December.

We have transportation department and shipping department to coordinate logistics and delivery. Seamless connection between inland transportation and sea transportation ensures smooth delivery, saves transportation time and delivers goods in the first time. During the sea transportation, we will update the freight progress for customers on a regular basis, so as to facilitate the tracking of customers and make preparations for receiving goods leisurely and timely.

Due to other non-steel quality reasons caused by the customer dissatisfaction, to timely explain to the customer, and help them solve the problem, for the customer really because of their own reasons, to give patient reply.The process of objection handling is the process of our technical service.