API 650 cylindrical welded storage tanks subject to a small internal pressure
The API 650 oil tank stiffener ring and backing strip, if used, are primary components, and they shall comply with the requirements of R.2.1. The API 650 cylindrical welded storage tanks stiffener ring may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange. One rat hole with a minimum radius of 3/4 in. shall be provided at each longitudinal shell joint and ring juncture weld.API 650 storage tanks API 650 cylindrical welded storage tanks are only suitable for containers that can evenly support the entire bottom and containers for non-refrigerated equipment with a design maximum temperature of 200 degrees Fahrenheit. It API 650 cylindrical welded storage tanks requires a minimum thickness of 3/16 inch. Other characteristics of the API 650 storage tank are: it is composed of carbon steel, austenitic duplex stainless steel and aluminum.In 2018, one of our India customers visit Zhengzhou office building and work shop to discuss carbon steel Q235B grind plate technical request. They have strict surface and thickness tolerance, and they also request UT and MT for testing for Q235B grind plate. As a result, they purchase 179 tons as trial order for first cooperation. After using the gind plate, the India customer has good comment on our API 650 cylindrical welded storage tanks quality Till now, we keep exporting around 100 tons per month as regularly,API 650 cylindrical welded storage tanks. weld tightness test: remove dirt from the API 650 cylindrical welded storage tanks weld, apply white powder emulsion, spray kerosene on the other side of the weld after drying. Because of the strong penetration of kerosene, if kerosene is sprayed after 12 hours (under low temperature conditions, the time can be extended), if the surface of the welded seam coated with white emulsion has no spots, the welded seam meets the requirements.After sales service support personnel pay attention to commitment in their work. In the process of people to people communication, mutual trust is an important factor for the long-term and stable communication. After sales service personnel must do what they say in the process of communication with customers.
Latest NewsMore+