aluminum sheet 5086 API standard 650 flexible liquid storage tanks

API 650 storage tank stipulates that if the thickness of the lower wall panel obtained by calculating the anti-overturning moment is greater than the thickness of the API standard 650 flexible liquid storage tanks hydrostatic pressure test (both do not include the corrosion allowance).

Treatment of API standard 650 flexible liquid storage tanks welding defects:
1. Lack of fusion: once found, it should be shoveled and grinded off before re welding.
2. Incomplete penetration: over standard defects shall be removed and re welded. When welding on both sides, the shallow side of the groove can be grinded and shoveled to expose the welding root on one side, and then the welding is repaired.
3. Slag inclusion: over standard defects shall be removed and re welded.
4. Crater: weld to full after grinding.
5. Air hole: if the internal air hole exceeds the standard, it shall be welded again after being removed by grinding shovel, and the surface air hole shall be removed by grinding wheel and then repaired.

The API standard 650 flexible liquid storage tanks stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.
Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.

The company has five major departments: steel plate production department (including quality inspection team), sales department, market development department, after-sales and logistics department, and finance department. The backbone of steel business from all over the country, with the chairman as the core, integrates self-confidence, independence, passion and responsibility, and strives for excellence! All people share the same belief: "Being a refined steel product line rewards customers, strengthen the steel industry, and realize the corporate dream!

BBN company is a modern enterprise integrating steel producing, warehousing and logistics, processing and distribution. We are committed to creating a "one-stop steel procurement service" platform. The main products are I-beam, angle steel, API standard 650 flexible liquid storage tanks , H-beam, hot-rolled coil, welded pipe, spiral pipe seamless pipe and many other steel products. Standing stocks amount to more than 30,000 tons, and complete specifications, the company gradually moves towards large-scale distribution enterprises with serialized products, standardized services and modern transportation management.