aluminum sheet 1060 API standard 650 mechanically-anchored steel tanks

The company adheres to the principle of integrity, standardization and efficiency, wins the market with technology, gains reputation with creative services, and wholeheartedly provides customers with high-quality API standard 650 mechanically-anchored steel tanks, efficient and fast services. Facing the future, adhere to independent innovation.The API standard 650 mechanically-anchored steel tanks stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.
Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.API 650 storage tank stipulates that if the thickness of the lower wall panel obtained by calculating the anti-overturning moment is greater than the thickness of the API standard 650 mechanically-anchored steel tanks hydrostatic pressure test (both do not include the corrosion allowance).Since its inception, the company has always adhered to the development policy of "survival with quality, development with products, cooperation with credibility, and service with customers". I would like to express my heartfelt thanks to the old and new friends and customers who have always given care, support and help to the company! And sincerely hope to establish a long-term cooperative relationship with them, mutual benefit and common development.Sand blasting and derusting of API standard 650 mechanically-anchored steel tanks uses compressed air as power and SiC, pomegranate sand and quartz sand as spraying materials to form high-speed jet beam, which is used to remove rust and dirt on the surface of metal storage tank and improve the binding force of workpiece with coating and plating material. Sand blasting is often used in API standard 650 mechanically-anchored steel tanks construction.