Alclad 3003 aluminum tube API Std 650 mechanically-anchored flat-bottom tanks
Design calculations and drawings required API Std 650 mechanically-anchored flat-bottom tanks for the fabrication and erection of each API 650 tank. A drawing index for each API 650 tank is required and shall be re-submitted each time drawings are revised and re-issued.
The API Std 650 mechanically-anchored flat-bottom tanks stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.
API Std 650 mechanically-anchored flat-bottom tanks, floating roof tank is composed of vertical cylindrical tank wall and floating roof, which is floating on the surface of liquid storage. The volume of floating roof storage tank is generally large, and its bottom plate is arched edge plate. The difference between floating roof tank and other types of storage tank is that there is a floating top cover floating on the surface of liquid storage, and the top cover floats up and down with the rise and fall of liquid storage.
Integrity based:To customers, we should value our credit and keep our good image forever.To colleagues: respect each other, trust each other, make efforts togetherService first:Customer satisfaction is always the first pursuit.The company provides customers with not only advanced technology and high-quality API Std 650 mechanically-anchored flat-bottom tanks products, but also the spirit of credit and service.Innovation:We are good at learning, drawing on the strengths of all, innovating and developing, introducing, researching and developing the latest technology, and making our products have a stronger vitality.
The company has our own truck fleet, and can transfer products flexibly and quickly. At the same time, we have large warehouses near the ports of Tianjin and Shanghai, so as to ensure that we can deliver high-quality products to customers in the first time. At the same time, it also greatly reduces the transportation cost, and realizes the double harvest of time benefit and economic benefit. Time guarantee is one of the important strengths of our service.
Our company has established and constantly improved the customer service system and emergency response system. Through the customer service management system, we track the service of the after-sales service team and provide efficient and standard services in time. At the same time, the company formulates a regular return visit system, compares the historical cases of customer problems, proposes a pre solution, and ensures that the service is in place in a short time.
