A841 grade A class 1 plates API Std 650 self-anchored tanks
The thickness of the overburden on the top of the API 650 oil tank should not be less than 0.5m. The surrounding backfill with clean sand or fine soil should be no less than 0.3m thick; the API 650 oil tank API Std 650 self-anchored tanks operation platform ladder selection unit is considered in a unified manner. The buried operation well is designed for buried horizontal oil tanks, and the two are compatible.
Large-scale vertical API Std 650 self-anchored tanks mostly use internal tank bottom heating coils to heat the medium stored in the storage tanks. The heating coils are mostly smooth tube structures arranged in an annular circle along the bottom of the API Std 650 self-anchored tanks. Commonly used heating methods include hot oil circulation heating method and hot water steam circulation heating method. The hot oil circulation heating method is to continuously extract part of the liquid medium from the storage tank, and then return it to the container to mix with the medium in the tank after heating, and the heat is quickly transferred through mechanical stirring.
Heat-affected zone impact specimens shall be taken across the weld and as near the surface of the material as is practicable. The API Std 650 self-anchored tanks material specimens shall be of sufficient length to locate the notch in the heat-affected zone after etching. The notch shall be cut approximately normal to the material surface to include as much heat-affected zone material as possible in the resulting fracture. Impact test specimens shall be cooled to the temperature stated in Q.22.
Considering the large workload of allocation and transportion for our steel materials, we have built special shipping department, and make it independent form transportation department. The transportation department is in charge of transporting steel materials from our mill and warehouse to the port, and our shipping department is in charge of the shipping matters. So that our whole shipping efficiency is improved, and shorten time for customers to receive goods.
As we all know, steel pipes occupy more space in the process of transportation. If there is no good way of packing, the transportation cost for steel pipes will be a big expense. In view of this characteristic, our company is ingenious and adopts the nest package method to solve this problem perfectly. The premise of the nest package is that the diameters of the steel pipes are different, and the small diameter pipe is inserted in the large diameter pipe. This not only saves the volume, but also saves the transportation cost. It also reduces the loading and unloading workload by half, saves precious time, and enables customers to receive goods earlier.
