A537Cl1 plates API Std 650 flat-bottom tanks

The tank wall design of API 650 oil storage tank. Since there is no ventilation pipe directly connected with the outside on the top of the API Std 650 flat-bottom tanks tank, the ventilation between the inside and outside of API 650 oil storage tank is realized by the respiration valve. The constant pressure of the respiration valve is 0.3kPa, so the pressure on the top of the tank is 0.3kPa.

Stamping of API 620 Storage Tank PlatesBefore plates required to be stamped by the steel mill are used, the inspector shall see that they bear the stamp. In laying out and cutting the API Std 650 flat-bottom tanks plates, at least one set of the original material identification markings should, if possible, be left where it will be plainly visible when the tank is completed. Should the identifying marks be obliterateSpot radiographic or ultrasonic examination shall be not less than 6 in. extending along the weld. Spot radiography shall comply with the standards given in 7.15.1.3. Where spot radiographic or ultrasonic examination is applied at joint intersections, the surface shall be prepared and examined for a distance of 3 in. on each side of the intersection, making the minimum length of examination 6 in. on the horizontal weld and 3 in. on the vertical weld.

The foundation design of the API Std 650 flat-bottom tanks should meet the requirements of foundation stability and deformation, that is, the API Std 650 flat-bottom tanks foundation should not be crushed and the uneven settlement value of the foundation should be within the allowable range. The uneven settlement of the storage tank foundation should be specified in the design process of the safe allowable range, because excessive uneven settlement will reduce the safety of the API Std 650 flat-bottom tanks and cause distortion and deformation of the tank wall and bottom plate.

Firmly establish the "people-oriented, safe development" concept, strictly follow the safety production policy of "safety first, prevention first, comprehensive management", strengthen and improve the management and supervision of safety production in an all-round way, and strive to improve the controllability of safety management And effectiveness, cultivate safety culture, improve long-term safety production mechanism, and build a harmonious BEBON.

In addition to our own truck fleet, we also have long-term cooperation with certain logistics companies to ensure that we can deliver API Std 650 flat-bottom tanks goods in time and smoothly. At the same time, because of the long-term cooperation and huge shipping volume, we can get a good transportation price and save transportation cost for the company and customers. Meanwhile, we have Shipping Department to arrange shipping work in advance. So as not to waste time on transportation both in land and on the sea.

We have a professional after-sales department to collect all information related to customers, so as to make relevant treatment in time according to the information, and file it; guide the user's product use methods and precautions; coordinate with the sales department, visit customers regularly, understand the customer's use and new requirements, and make a customer visit record; When communicating with customers, they should be enthusiastic and careful to understand the situation of product problems and put forward solutions