A516 grade 70 plates API standard 650 storage tank

Structural shapes of 9% and 5% nickel steel may be furnished to the chemical and physical requirements of ASTM A353, A553, or A645. Physical tests shall be in accordance with the requirements of ASTM A6.
API standard 650 storage tank used Piping, Tubing, and Forgings
Material used for piping, tubing, and forgings shall be compatible in welding strength, and thermal expansion coefficient with the tank shell material. In addition to the specific requirements of this appendix, all piping within the limitations of 1.3.2 shall fulfill the minimum requirements of ASME B31.3.

For API 650 tanks Projection from outside of tank shell to extreme face of flange - plus or minus 5 mm. API standard 650 storage tank Elevation or radial location - plus or minus 6 mm. API 650 tanks Flange tilt in any plane, measured on the diameter across the gasket surface - plus or minus degree but not exceeding 5 mm. Flange bolt hole orientation - plus or minus 2 mm.

The Philiphine customer is our old customer, and they are engaged in offshore oilfield resources drilling projects. Thus they have regular steel demands. They ordered 1008 tons API 5L grade B ERW pipes and Q345B seamless pipes from us in April 2018. And told us that is a regular demand almost every two month. Since our first success cooperation, we have cooperated with each other regularly. And they also bring us new opportunities and signification in Philippians market.

Ultrasonic testing can find the internal defects of API standard 650 storage tank welding joint, this detection method is very accurate for the internal layer defects of oil tank, but ultrasonic detection is not suitable for the detection of thin-walled storage tank materials. Dye penetrant testing is only suitable for detecting the defects of the surface opening of API standard 650 storage tank and so on metal oil tanks. The feature of this method is convenient and fast.

Due to other non-steel quality reasons caused by the customer dissatisfaction, to timely explain to the customer, and help them solve the problem, for the customer really because of their own reasons, to give patient reply.The process of objection handling is the process of our technical service.