A350 grade LF2 forgings API 650 stainless and carbon steel tank

Prefabrication requirements of large vertical API 650 stainless and carbon steel tank accessories: the prefabrication shall be deepened as far as possible in strict accordance with the requirements of construction drawings and specifications, according to the principle of convenient installation and construction, as much as possible to reduce the installation workload, especially the workload of high-altitude operation. The prefabricated accessories shall be strictly inspected to ensure the quality and make marks. In addition, effective measures should be taken to prevent deformation, damage and corrosion during storage, transportation and stacking on site.Shell Stiffening Rings for Tanks That Contain Liquid
Internal or external shell stiffening rings may be required to maintain roundness when the tank is subjected to wind, vacuum, or other specified loads. When API 650 stainless and carbon steel tank stiffening rings are required, the stiffener-to-shell weld details shall be in accordance with Figure Q-1 and Q.3.5.2 through Q.3.5.5.
Three-plate laps or butt-weld junctions in tank bottoms shall be not closer than 12 in. from each other or from the butt-welds of the annular plates.
Bottom plates, other than annular bottom plates for a 9% or 5% nickel steel or stainless steel tank that contains liquid, may have a minimum thickness of 3/16 in. exclusive of any specified corrosion allowance.Under the same sealing effect, the internal floating roof tank of API 650 oil storage tank can further reduce the evaporation loss compared with the API 650 stainless and carbon steel tank External floating roof tank. This is due to the shielding of the fixed roof and the gas layer between the fixed roof and the internal floating plate, which has more significant heat insulation effect than the double disc floating roof of the API 650 stainless and carbon steel tank external floating roof tank.To the society: With the development of the company, BEBON has always adhered to the development mission of "developing heavy industry for the benefit of all mankind; improving the environment and achieving sustainable development”, operating with integrity and paying taxes in accordance with law.For our employees, the company fully respect employee value, pursuing mutual development of enterprise and employees.We have replenish steel materials stocks, now there are huge stocks of S355JR, A36, API 650 stainless and carbon steel tank A572 Gr 50, 16Mo3, A516 Gr 70, ABS grade A, AH32, AH36, EH36, SPA-H, SG295,SM700C etc steel materials. We can arrange delivery for those stock steel products within short time. Meanwhile, we also provide further processing for the API 650 stainless and carbon steel tank steel materials, such as cutting, drilling, bending, welding, etc. Please do not hesitate to contact us if you have any steel demands.