A334 grade 6 pipe API 650 floating-roof tanks

Our quality control department will do inspection for details of the steel materials API 650 floating-roof tanks before delivery. We would invite the customer side to attend the inspection together. If they can not come, we will also take rich pictures for them to check. Meanwhile, we will publish inspection report and send them the PDF version. Besides, we accept any third party inspection such as SGS, BV, etc. And our quality control department will support the third party to inspect the steel materials smoothly and try our best to deliver the qualified steel materials to customers earlier.The materials used in the construction of Appendix Q oil tanks may be subject to severe pitting, cracking, or rusting if they are exposed to contaminated test water for extended periods of time. The Purchaser shall specify a minimum quality of test water that conforms to Q.8.3.2 through Q.8.3.8. After the water test is completed, the tank API 650 floating-roof tanks shall be promptly drained, cleaned, and dried.The tank wall design of API 650 oil storage tank. Since there is no ventilation pipe directly connected with the outside on the top of the API 650 floating-roof tanks tank, the ventilation between the inside and outside of API 650 oil storage tank is realized by the respiration valve. The constant pressure of the respiration valve is 0.3kPa, so the pressure on the top of the tank is 0.3kPa.Based on the principle of “sincerity and win-win cooperation”, our company keeps forging ahead. In the fierce market competition, we have won the trust and rapid development of our customers with good cooperation and sincere service spirit. With pioneering spirit, the pursuit of excellence, continuous learning, and never satisfied content, we will create a win-win situation with our customers to create a better future. The company has sufficient inventory and complete varieties and specifications.The main contents of safety inspection for atmospheric storage tank, API 650 floating-roof tanks are to see whether the tank foundation is sunk, whether the tank is corroded, whether there are cracks in the tank body and bottom, whether there is concave convex phenomenon on the top and wall of the tank, whether the accessories of the storage tank are in good condition, etc. After the API 650 floating-roof tanks safety inspection and detection, the defects found in the tank should be handled according to the inspection rules in time to ensure the normal and safe use of the storage tank in the later stage.