9m diameter API Std 650 self-anchored flat-bottom steel tanks

The reticulated API Std 650 self-anchored flat-bottom steel tanks shell API 650 storage tank is an important large-span space structure with high safety. Generally, the large-scale API 650 storage tank with a diameter of 21-60 meters or a volume of more than 20000 cubic meters should adopt the reticulated shell technology, which has been widely promoted and adopted in the world and China's petrochemical industry for more than 30 years.

Natural ventilation loss: the main cause of natural ventilation loss is that the API Std 650 self-anchored flat-bottom steel tanks is not tightly sealed. This is usually due to corrosion perforation on the top of the oil tank, or there is a height difference between the two orifices. The air tightness of the mixture in the API Std 650 self-anchored flat-bottom steel tanks is higher than that of the air, which causes the mixture gas in the tank to be discharged into the atmosphere from the lower hole, and the external air flows into the tank from the high hole, resulting in natural ventilation loss.

When the API Std 650 self-anchored flat-bottom steel tanks top shell course is the minimum thickness indicated in 5.10.4, Table 5-6 and Figure 5-6, details a – e, h and i, the minimum anchorage shall be designed for normal loads as specified by the Purchaser and by this standard. See 5.11.2.3 for the allowable stress. When the top shell course is thickened beyond the minimum thickness provided in Table 5-6 or as in Figure 5-6, details f and g, or a knuckle is used, the minimum anchorage shall be designed for three times the internal design pressure. The allowable stress for this loading is 90% of the minimum specified yield strength of anchorage material.

In line with the service concept of "honesty first, customer first" and the service tenet of "all for customer satisfaction", the company adopts the acceptance and response mode of combining manual and automatic, and accepts the diversified service demands of customer business consultation, complaint declaration, business acceptance, etc. through telephone, fax, e-mail, visit, letter, etc.

"Efficiency is benefit, time is money", the company is equipped with a high standard logistics team. After the products pass the factory inspection, they will coordinate the shipment as soon as possible according to customer requirements and schedules to hand over the booked steel materials to customers at the first time, to ensure no delay of customer's project progress, to strive for more project preparation time for customers.