5456 aluminum pipe API 650 mechanically-anchored steel tanks
The working pressure of the low-pressure storage tank is greater than that of the atmospheric storage tank, but its pressure is less than 0.1MPa. API 650 petroleum storage tanks are classified according to their environment: Above-ground storage tank: refers to the bottom of the storage tank at the design elevation of API 650 mechanically-anchored steel tanks and above; the bottom of the tank is below the design elevation of +0.00 but not exceeding.
Compared with the external floating roof API 650 mechanically-anchored steel tanks, the internal floating roof API 650 mechanically-anchored steel tanks has the advantages of protecting the floating roof from wind and rain and ensuring the quality of liquid storage under the floating roof At the same time, because the inner floating plate is in the tank, there is no rain and snow load, so the central drainage pipe and escalator and other accessories on the floating plate can be omitted In addition, under the same sealing conditions, the internal floating roof tank can further reduce the evaporation loss compared with the External floating roof tank
Changes in Tank ShapeIf in any of the foregoing tests there is an excessive rise of the bottom of the tank around the boundary of contact with grade, or off its foundations, or if any of the specified conditions of test loading cause other appreciable changes in the shape of the tank, the design shall be reviewed and means shall be provided in the tank for holding the shape within permissible limits under all conditions of loading,API 650 mechanically-anchored steel tanks. Additional TestsThe tests prescribed in API 620 tank 7.18 are believed to be sufficient for most tanks constructed according to these rules; if, in the opinion of the designer, additional tests are needed to investigate the safety of a tank under certain other conditions of loading, as determined from the design computations, these tests shall be made on the tank involved in addition to the tests specified in this standard.
Every after-sales service shall have a detailed record of the customer's product problems and handling methods. The records shall be sorted into volumes and filed on a monthly basis, and submitted to the technical department for filing. The problems found in the after-sales service shall be summarized in a timely manner, discussed with the technical department, the quality inspection department and the production department, and a proper solution shall be proposed for the technical department to improve in a timely manner;
The company uses outsourced logistics operations. Our cooperated professional third-party logistics providers use the advantages of large-scale production and cost advantages to achieve cost savings by increasing the utilization of resources in each link, so that we can benefit from the separation of cost structure. Therefore, we can also provide customers with better, faster and more efficient cargo transportation, delivery, and lower freight costs.
