5052 aluminum tube API Std 650 cylindrical liquid-storage tank

The main contents of safety inspection for atmospheric storage tank, API Std 650 cylindrical liquid-storage tank are to see whether the tank foundation is sunk, whether the tank is corroded, whether there are cracks in the tank body and bottom, whether there is concave convex phenomenon on the top and wall of the tank, whether the accessories of the storage tank are in good condition, etc. After the API Std 650 cylindrical liquid-storage tank safety inspection and detection, the defects found in the tank should be handled according to the inspection rules in time to ensure the normal and safe use of the storage tank in the later stage.

The API Std 650 cylindrical liquid-storage tank stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.
Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.

Storage tanks API Std 650 cylindrical liquid-storage tank built to these standards are spread across U.S. refineries, terminals, pipelines, and production facilities. The API 650 petroleum storage tank detailed standard specifies the design, processing, welding, inspection and installation procedures of the storage tank.

Strengthen system construction. The system itself has a certain binding force, which specifies the rights and obligations of employees. It is a passive management means for employees. Its purpose is to promote each employee to develop good professional habits, form good behavior norms, and promote the improvement of enterprise management level.

Our company stocks a wide range of hot rolled carbon steel plate distributed globally from our service centers in the U.S., Canada, Mexico, U.K, France, Shanghai, and Singapore. Customers calling for API Std 650 cylindrical liquid-storage tank A516 a lot of times are also trying to get their arms around forecast issues. As our customers continue to work on their forecasts, IRON & Steel has options to help you conduct structured forecast reviews and put inventory strategies in place to effectively manage any impact from forecast variability.