27m diameter API standard 650 horizontal tank

Crack treatment of API standard 650 horizontal tank weld area: find out the crack tip with ray or ultrasonic flaw detection, drill cut-off holes at both ends of the crack with the cut-off method, the hole depth is slightly greater than the crack depth, or groove (crack stop groove) is made by angle grinder at both ends of the crack, shovel and grind the whole crack, and grind it into a suitable groove; use radiographic inspection and dye detection to verify that the crack has been completely excavated, and finally repair welding.

All API standard 650 horizontal tank fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole, and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.

In API 650 oil storage tank, when the mixing ratio of combustible medium and air reaches a certain limit, it is easy to cause explosion. Therefore, it is necessary to add API standard 650 horizontal tank external floating roof to open cylindrical steel API standard 650 horizontal tank tank. At present, the external floating roof is most suitable for large-scale API 650 oil storage tank in China, ranging from 20000, 30000, 50000 cubic meters to 100000 cubic meters.

Strengthen system construction. The system itself has a certain binding force, which specifies the rights and obligations of employees. It is a passive management means for employees. Its purpose is to promote each employee to develop good professional habits, form good behavior norms, and promote the improvement of enterprise management level.

The high strength API standard 650 horizontal tank low alloy steel, which is shorten as HSLA steel, is one of our main products. We have professional team to serve you. For any demands or questions about HSLA steel, for example, ASTM A572 grade 50 chemical composition, difference between S355JR and S355J2, mechanical properties of API standard 650 horizontal tank ST52 steel, Q345B tensile strength, Q345D steel ASTM equivalent, HSLA steel price etc. , please do not hesitate to contact us and consult.