220ft diameter API 650 aboveground petroleum storage tanks

The salesman of the company is familiar with all aspects of knowledge. Understand the company profile: group, company profile, various honor certification, enterprise's functional strength and other advantages analysis. Know the main product brand types and specifications of the company, and know the special knowledge of the product (production process and advantages of the product, simple identification method of product quality, etc.)

Define the welding sequence of API 650 aboveground petroleum storage tanks bottom plate: the welding sequence of metal vertical storage tank shall be carried out according to the procedure required by the welding scheme. Spot welding shall be consistent with the formal welding requirements, and no spot welding shall be carried out for the weld not welded. Back bar should be added to prevent deformation when welding the full length seam of middle plate, butt joint of edge plate and turtle shell joint.

Density of API 650 aboveground petroleum storage tanks Liquid Stored
The density of the liquid stored shall be its maximum density within the range of design temperatures, but no less than 29.3 lbf/ft3 for methane, 34.21 lbf/ft3 for ethane, and 35.5 lbf/ft3 for ethylene.
Design Metal Temperature
The design metal temperature of each component exposed to the liquid or vapor being stored shall be the lower of the temperatures specified as follows: The design metal temperature of the components of the API 620 single-wall tank or the inner tank of a double-wall tank shall be the minimum temperature to which the tank contents shall be refrigerated, including the effect of subcolony at reduced pressure.