10ft diameter API Std 650 mixed material tanks

The temperature requirements of the API 650 oil storage tank area are closely related to the evaporation loss, energy loss, API Std 650 mixed material tanks storage and storage platform tank materials and the selection of detection instruments, or the temperature of the API 650 oil storage tank area. The cost of storage has a direct impact.

API Std 650 mixed material tanks, floating roof tank is composed of vertical cylindrical tank wall and floating roof, which is floating on the surface of liquid storage. The volume of floating roof storage tank is generally large, and its bottom plate is arched edge plate. The difference between floating roof tank and other types of storage tank is that there is a floating top cover floating on the surface of liquid storage, and the top cover floats up and down with the rise and fall of liquid storage.

Any joints between the adjacent sections of API 620 oil storage tank stiffening rings, as shown in Figure Q-1, shall be made so that the required moment of inertia of the combined ring-shell section is provided. Weld joints between adjacent sections shall be made with full-thickness and full-penetration butt-welds. Stiffening-ring butt-welds may employ metal backing strips. Backing strips and the associated welding shall be made in a manner that provides a smooth contour in the rat hole and all other weld joint ends. All weld passes shall be started at the rat hole and other weld joint ends and shall be completed by moving away from these ends. Passes shall be overlapped away from edges to provide a smooth continuous weld.

The quality inspection department is responsible for the inspection management of raw materials and finished products, and the quality inspection and acceptance of products and raw materials. Strictly abide by the company's management system, conscientiously exercise the management power given by the company, and put an end to all ultra vires; be responsible for the inspection of all kinds of raw materials entering the company, and put forward quality problems and handling opinions.

In view of the characteristics of container transportation, such as high added value, low cargo damage and short time, our company takes more consideration of port collection and distribution conditions, port facilities, flight density and route coverage when choosing ports. For the convenience of customers, as well as the safety of goods.