1060 aluminum shapes API standard 650 SUG II tanks

There is a gap of 100 mm to 500 mm between the shell of API 650 crude oil storage API standard 650 SUG II tanks tank and the floating plate of external floating roof to ensure that there is no chuck during operation. Use API standard 650 SUG II tanks edge sealing system to reduce edge evaporation. The support legs of API 650 crude oil tank floating roof are usually movable and retractable and suspended in liquid.

Generally, the snow load in the API standard 650 SUG II tanks construction area should be considered before the design and construction of the tank. The snow load in the API standard 650 SUG II tanks construction area has an impact on the tank roof design and operation, especially in the area with large snow load, the roof load of large storage tank with large diameter increases. Anti freezing, heat preservation and waterproof measures shall be taken for the additional facilities of storage tanks, such as pumps, breathing valves, flame arresters, detection instruments and thermal insulation layers.

Preheating should be performed by heating and maintaining this heat in appreciable lengths of the joint to be welded, preferably using a strip burner with a mild flame rather than a harsh flame such as that from a cutting torch. Electrical strip heaters are available and have been found to be satisfactory. The preheat of 300°F should be checked with a temperature-sensitive crayon, or similarly accurate means, so that the steel 4 in. (or four times the API standard 650 SUG II tanks plate thickness, whichever is greater) on each side of the joint will be maintained at the minimum preheat temperature. Ring burners or heaters are recommended for nozzle and manway welds. At no time during the welding should the base metal fall below a temperature of 300°F.

Our company is a specialized technical support and after-sales service organization - customer service center. At the same time, we have provided excellent technical API standard 650 SUG II tanks personnel and strong technical support for our company, and cultivated an excellent after-sales team for our company. Our company will appoint a full-time service manager to be responsible for the unified coordination of technical support and API standard 650 SUG II tanks after-sales service of the project.

Iron and steel goods, including pig iron, ingots, all kinds of steel and so on. Therefore, logistics companies are required to load evenly and evenly in the process of transportation, prevent moisture and prevent corrosion. It is necessary to prevent the API standard 650 SUG II tanks steel sheet from being mixed with water when transporting the steel; it is necessary to prevent the API standard 650 SUG II tanks steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when loading the API standard 650 SUG II tanks steel sheet on the truck Good luck.