1060 aluminum plate API Std 650 liquid storage tanks

Normal pressure API 650 storage tank: When the gas side pressure of API 650 storage tank is the same as atmospheric pressure or less than 13 atmospheres (gauge), API Std 650 liquid storage tanks is called atmospheric storage tank. API 650 petroleum storage tanks low pressure storage tank: when the pressure is greater than 13 atmospheres (gauge) and less than 0.1MPa, it is called low pressure storage tank.

The insert plate weld shall not cross any shell seams and shall be at least the greater of 10 times the shell thickness or 12 in. from any other weld in the API Std 650 liquid storage tanks shell including shell seams, shell-to-bottom weld or attachment welds. The butt weld around the periphery of the plate shall be examined over 100% of its length by both liquid penetrant method and radiographic method. The liquid penetrant examination is required on the root pass, on the back-gouged surface, and on the inside and outside finished weld surfaces. Additionally, the weld shall be vacuum box leak tested.

Usually, the soil resistance of the foundation should be considered before the design and construction of API Std 650 liquid storage tanks. The soil endurance in the API Std 650 liquid storage tanks construction area plays a decisive role in the basic cost of the tank. In areas with high soil resistance, not only the cost of foundation treatment can be greatly reduced, but also the ratio of height to diameter of storage tank can be obtained. Therefore, the investment cost of the API Std 650 liquid storage tanks can be greatly saved in the area with large soil resistance.

Company management philosophy: integrity-based, service-oriented, excellence, affinity symbiosis. Based on quality, continuously create maximum value for customers. Always have a grateful heart, thank the society, thank family and friends for their support and help to the development of the company, thank customers for their trust, thank colleagues for their cooperation, and thank competitors for their supervision.

Management information and high efficiency. Because of the rapid flow of API Std 650 liquid storage tanks goods, container multimodal transport and "door-to-door" transport, it is required that the port must have a modern information network, so that it can have the comprehensive capabilities of all-weather access, rapid loading and unloading, customs clearance, collection, distribution, storage and transportation

The after-sales service department will pay return visit to each customer by call or email, report problems found during the return visit in time, and discuss with the production and quality inspection center to propose effective solutions and follow up in a timely manner, so as to ensure the benefits each customer are fully guaranteed, and to provide customers with more value-added services.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!